Network Operation and Remote Control
R&S
®
SMBV100B
603User Manual 1178.4460.02 ─ 03
●
The App or web browser implements the VNC functionality on the smart device for
remote operation.
It is recommended that all components in the network use DHCP, which automatically
assigns the relevant address information.
With the configuration in the example, you can reach the instrument from a great dis-
tance, since the WLAN router acts as an additional access point.
11.16.2.1 Using a VNC App
Using a VNC App enables the smart device to access the R&S SMBV100B via WLAN.
The VNC Apps are available from various manufacturers of the smart devices. The list
of supported devices is different according to the smart device. Refer to the manufac-
turer's website to find out whether a VNC App is available for your device, and how it is
installed.
1. In the network, establish the connection of the WLAN router to the LAN router.
We assume the connection of the LAN router and the R&S SMBV100B and their
configuration in the LAN.
2. Configure the WLAN router according to the manufacturer's instructions.
3. Install the required VNC App on your smart device.
4. On the smart device, start the VNC App.
5. In the address field, enter the IP address of the instrument.
Tip: The R&S SMBV100B indicates IP address on the screen.
A log-on dialog opens and requests the password for the VNC connection.
The default user name and password is instrument.
Tip: Default password. Remote access via VNC uses the user name "instrument"
with default user password "instrument".
Note: We recommend that you change the default password before connecting the
instrument to a network.
See Chapter 10.5.4, "Password Management", on page 545.
6. Enter the password to establish the remote access.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated.
11.16.2.2 Using a Web Browser with HTML5
The R&S SMBV100B supports remote operation from a smart device via VNC with any
HTML5 compliant web browser, like Internet Explorer, Firefox, Google Chrome, or
Safari for instance.
How to Set Up Remote Operation via VNC
To Next Page
Loading...
