Rohde & Schwarz SMBV100B - Analog Modulation Subsystems

Remote Control Commands
R&S
®
SMBV100B
688User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BBIN:POWer:PEAK <Peak>
Peak level of the external baseband signal relative to full scale of 0.5 V (in terms of dB
full scale).
Parameters:
<Peak> float
Range: -60 to 3.02
Increment: 0.01
*RST: 0
Default unit: dBfs
Example: See Example "Applying an external digital baseband signal (Dig
I/Q)" on page 681
Manual operation: See "Peak Level" on page 464
[:SOURce<hw>]:BBIN:POWer:RMS?
Queries the RMS level of the external digital baseband signal.
Return values:
<Rms> float
Range: -100 to 10
Increment: 0.01
*RST: 0
Example: see Example "Applying an external digital baseband signal (Dig
I/Q)" on page 681
Usage: Query only
Manual operation: See "Level" on page 464
[:SOURce<hw>]:BBIN:CDEVice?
Indicates the ID of an externally connected Rohde & Schwarz Instrument or
Rohde & Schwarz device.
Return values:
<CDevice> string
"None" - no device is connected.
Example:
SOURce:BBIN:CDEVice?
Queries the connected device ID.
Usage: Query only
Manual operation: See "Connected Device" on page 459
12.16.3 Analog Modulation Subsystems
Option: see Chapter 6.11.1, "Required Options", on page 346.
SOURce Subsystem