Rohde & Schwarz SMBV100B - Clock Settings

Remote Control Commands
R&S
®
SMBV100B
730User Manual 1178.4460.02 ─ 03
Parameters:
<Divider> integer
Range: 2 to 1024
*RST: 2
Example: See Example "Adjusting clock, marker and trigger settings"
on page 713
Manual operation: See "Marker Mode" on page 114
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:FREQuency?
Queries the pulse frequency of the pulsed marker signal PULSe.
Return values:
<Frequency> float
Example: See Example "Adjusting clock, marker and trigger settings"
on page 713
Usage: Query only
Manual operation: See "Marker Mode" on page 114
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:DELay <Delay>
Defines the delay between the signal on the marker outputs and the start of the signal,
expressed in terms of symbols.
Parameters:
<Delay> float
Range: 0 to 16777215
Increment: 0.001
*RST: 0
Example: See Example "Adjusting clock, marker and trigger settings"
on page 713
Manual operation: See "Marker x Delay" on page 114
Clock Settings
[:SOURce<hw>]:BB:DM:CLOCk:SOURce <Source>
Selects the clock source:
●
INTernal: Internal clock reference
Parameters:
<Source> INTernal
*RST: INTernal
Example: See Example "Adjusting clock, marker and trigger settings"
on page 713.
SOURce Subsystem