Maintenance
R&S
®
SMBV100B
929User Manual 1178.4460.02 ─ 03
13.3.1 Date and Time Settings
The R&S SMBV100B uses an internal real-time clock to determine the date and time. It
adjusts the time and date to the timezone of your location automatically, by providing a
selection list of continents and cities.
The instrument records the time whenever you create or modify files on your instru-
ment or you use timed licenses. By default, the instrument is set to the UTC timezone,
but you can select the timezone according to your location.
Moreover, the instrument supports NTP protocol for synchronizing all connected instru-
ments and computer systems to minimize time delays in the network.
Access:
► Select "System Config > Setup > Maintenance > Date / Time".
The "Date / Time" dialog contains the time and data settings of the operating sys-
tem.
This function is password-protected. Unlock the protection level 1 to access it.
The required remote commands are described in Chapter 12.17, "SYSTem Subsys-
tem", on page 889.
To select the timezone
1. Press the [Setup] key.
2. Select "Maintenance > Date /Time > Timezone".
3. Select continent and city of your location.
Tip: By typing the first letter, you can quickly navigate through the lists to find the
desired destination.
4. Close the dialogs.
The instrument adjusts the time according to the selected location.
Performing Maintenance Tasks
To Next Page
Loading...
