Rohde & Schwarz SMBV100B - Marker Commands

Remote Control Commands
R&S
®
SMBV100B
776User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<ExtTimeDelay> float
Range: 0 to 2147483647/clock rate
Increment: 1E-9
*RST: 0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 739
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 113
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
Example: See Example "Specifying delay and inhibit values in time units"
on page 739
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 113
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of symbols by which a restart is inhibited.
Parameters:
<Inhibit> integer
Range: 0 to 21.47*clockRate
*RST: 0
Example: see Example "Managing waveform files" on page 738
Manual operation: See "External / Trigger Inhibit" on page 112
Marker Commands
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE............................................. 777
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:ONTime...........................................777
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:OFFTime......................................... 777
SOURce Subsystem