Rohde & Schwarz SMBV100B - Understanding the Display Information

Getting Started
R&S
®
SMBV100B
75User Manual 1178.4460.02 ─ 03
2.5.3 Understanding the Display Information
The block diagram of the R&S SMBV100B displays all main settings and generator
states, divided into three main operation areas.
Figure 2-11: Block diagram
1 = Status bar (frequency and level display)
2 = Block diagram
3 = Taskbar/softkey bar
● Status Bar............................................................................................................... 75
● Block Diagram.........................................................................................................76
● Taskbar....................................................................................................................77
● Additional Display Characteristics...........................................................................78
2.5.3.1 Status Bar
The status bar at the top of the screen indicates the RF frequency and the level of the
output signal provided to the DUT. You can set both parameters directly here.
1
= Frequency display
2 = Status buttons
3 = Level display
The status buttons indicate key parameters that are set for the output signal. Most of
the status buttons are virtual keys you can use to open a corresponding menu or dia-
log.
Instrument Control