Getting Started
R&S
®
SMBV100B
48User Manual 1178.4460.02 ─ 03
Figure 2-3: Rear panel
1 = Serial number (six digits in the string 1423.1003.02-<serial number>-<checksum>)
2a, 2b = User x connectors
3a = I/Q, I/Q Bar connectors (output)
3b = I/Q connectors (input)
4 = Dig I/Q connector
5 = HS Dig I/Q connector
6 = Adv Data/Ctrl connector (provided for future use)
7 = LO In/LO Out connectors
8a = Ref In/Ref Out connectors
8b = Ref In/Ref Out 1GHz connectors
9 = LF connector
10 = Mod Ext connector
11 = Pulse Video connector
12 = Pulse Ext connector
13 = Signal Valid connector
14 = Inst Trig connectors
15 = IEC 625/IEEE 488 connector
16 = Non-Volatile Memory
17, 19 = USB/USB In connectors
18 = LAN connector
20 = AC power supply connection and main power switch
2.2.2.1 Connectors
User x
Multipurpose connectors. The input/output signal has to be defined.
The Table 2-9 lists the signals assigned to the User x connectors in the default instru-
ment state.
Table 2-9: Default configuration of the User x connectors
User connector Direction Default assigned signal
3 Input Global Trigger
4 Input Global Next Segment
5 Output Baseband Sync Out
Instrument Tour
To Next Page
Loading...
