Rohde & Schwarz SMBV100B - Frequency Response Commands

Remote Control Commands
R&S
®
SMBV100B
818User Manual 1178.4460.02 ─ 03
Usage: Event
Manual operation: See "Import / Export" on page 341
[:SOURce<hw>]:CORRection:DEXChange:MODE <Mode>
Determines import or export of a user correction list.
Specify the source or destination file with the command [:SOURce<hw>]:
CORRection:DEXChange:SELect.
Parameters:
<Mode> IMPort | EXPort
*RST: IMPort
Example: See Example "User correction data exchange" on page 812 .
Manual operation: See " Mode " on page 340
[:SOURce<hw>]:CORRection:DEXChange:SELect <Filename>
Selects the ASCII file for import or export, containing a user correction list.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "User correction data exchange" on page 812 .
Manual operation: See "Select Source/Select ASCII Destination" on page 341
12.16.5.3 Frequency Response Commands
This section lists the frequency response commands related to the I/Q modulator.
Example: Enabling high-quality optimization
SOURce1:CORRection:FRESponse:RF:OPTimization:MODE QHIG
SOURce1:CORRection:FRESponse:RF:OPTimization:BANDwidth:MODE AUTO
SOURce1:CORRection:FRESponse:RF:OPTimization:BANDwidth:VALue?
// 160000000
SOURce1:CORRection:FRESponse:RF:OPTimization:LOCal
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:MODE................................... 818
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:BANDwidth:MODE..................819
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:BANDwidth[:VALue]................ 819
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:LOCal....................................820
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:MODE
<FreqRespOptMode>
Sets the optimization mode.
SOURce Subsystem