Remote Control Commands
R&S
®
SMBV100B
717User Manual 1178.4460.02 ─ 03
Save/Recall Settings
[:SOURce<hw>]:BB:DM:STANdard:ULISt:CATalog?
[:SOURce<hw>]:BB:DM:SETTing:CATalog?
Queries the files with digital modulation respectively user standard settings in the
default directory. Listed are files with the file extension *.dm and *.dm_stu.
Refer to Chapter 12.6.2, "Accessing Files in the Default or in a Specified Directory",
on page 618 for general information on file handling in the default and a specific direc-
tory.
Return values:
<Catalog> "<filename1>,<filename2>,..."
Returns a string of file names separated by commas.
Example: See Example "Performing general tasks" on page 712
Usage: Query only
Manual operation: See "Save/Recall" on page 118
[:SOURce<hw>]:BB:DM:STANdard:ULISt:STORe <Filename>
[:SOURce<hw>]:BB:DM:SETTing:STORe <Filename>
Stores the current settings into the selected file; the file extension (*.dm respectively
*.dm_stu) is assigned automatically.
Refer to Chapter 12.6.2, "Accessing Files in the Default or in a Specified Directory",
on page 618 for general information on file handling in the default and a specific direc-
tory.
Setting parameters:
<Filename> string
Example: See Example "Performing general tasks" on page 712
Usage: Setting only
Manual operation: See "Save/Recall" on page 118
[:SOURce<hw>]:BB:DM:STANdard:ULISt:LOAD <Filename>
[:SOURce<hw>]:BB:DM:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.dm respectively *.dm_stu.
Refer to Chapter 12.6.2, "Accessing Files in the Default or in a Specified Directory",
on page 618 for general information on file handling in the default and a specific direc-
tory.
Setting parameters:
<Filename> string
Example: See Example "Performing general tasks" on page 712
Usage: Setting only
SOURce Subsystem
To Next Page
Loading...
