Rohde & Schwarz SMBV100B - Fpga;Uc Update Settings

Maintenance
R&S
®
SMBV100B
939User Manual 1178.4460.02 ─ 03
Select ARB File
Provides access to the standard "File Select" function of the instrument. The provided
navigation possibilities in the dialog are self-explanatory.
See also, chapter "File and Data Management" in the R&S SMBV100B User Manual.
Remote command:
:TEST:BB:GENerator:ARBitrary on page 920
13.3.7 FPGA/uC Update Settings
Access:
► Select "System Config > Setup > Maintenance > FPGA/µC Update".
This dialog enables you to check for and install internal assembly updates.
Settings:
Check For Updates..................................................................................................... 939
Assembly.....................................................................................................................939
Install...........................................................................................................................940
Shut down................................................................................................................... 940
Check For Updates
Check for updates of the FPGA/µC.
Remote command:
n.a.
Assembly
The table shows the installed assemblies and their states.
"Assembly"
Assembly designation.
"State"
Indicates the current state of installed assemblies.
Performing Maintenance Tasks