Rohde & Schwarz SMBV100B - Marker Settings

Remote Control Commands
R&S
®
SMBV100B
728User Manual 1178.4460.02 ─ 03
Parameters:
<ExtTimeDelay> float
Range: 0 to 7929.170398682
Increment: 0.25E-9
*RST: 0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 739
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 113
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST: 0
Example: See Example "Specifying delay and inhibit values in time units"
on page 739
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 113
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of symbols by which a restart is inhibited.
Parameters:
<Inhibit> integer
Range: 0 to 21.47*symbRate
*RST: 0
Default unit: symbol
Example: See Example "Adjusting clock, marker and trigger settings"
on page 713
Manual operation: See "External / Trigger Inhibit" on page 112
Marker Settings
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:MODE <Mode>
Defines the signal for the selected marker output.
For detailed description of the regular marker modes, refer to "Marker Modes"
on page 94.
SOURce Subsystem