Maintenance
R&S
®
SMBV100B
942User Manual 1178.4460.02 ─ 03
Assembly
The tables in the tabs show characteristics of the installed assemblies.
"Assembly"
Assembly designation.
"Part Number"
Part number of the assembly.
"Serial Number"
Serial number of the assembly.
"Revision"
Revision state of the assembly.
"Slot"
Indicates whether the assembly is connected to the serial bus or PCI
bus.
Remote command:
:DIAGnostic<hw>:BGINfo? on page 633
Counter
Displays information on the operation times of the R&S SMBV100B.
Operation Time / h ← Counter
Displays the operation time in hours.
Remote command:
n.a.
Power On Count ← Counter
Displays the number of power-on.
Remote command:
n.a.
Last Factory Calibration ← Counter
Displays the date of the last factory calibration.
Remote command:
:CALibration:DATA:FACTory:DATE? on page 631
13.3.9.2 Versions/Options Settings
Access:
► Select "System Config > Setup > Instrument Assembly > Versions / Options".
Performing Maintenance Tasks
To Next Page
Loading...
