EasyManua.ls Logo

Rohde & Schwarz SMBV100B - General Settings and Carrier Setup Settings

Rohde & Schwarz SMBV100B
1030 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Control Commands
R&S
®
SMBV100B
783User Manual 1178.4460.02 ─ 03
// ******************************************************************
SOURce:BB:MCCW:TRIGger:OUTPut1:MODE RESTart
SOURce:BB:MCCW:TRIGger:OUTPut2:MODE PULSe
SOURce:BB:MCCW:TRIGger:OUTPut2:PULSe:DIVider 5
SOURce:BB:MCCW:TRIGger:OUTPut2:PULSe:FREQuency?
SOURce:BB:MCCW:TRIGger:OUTPut3:MODE PATTern
SOURce:BB:MCCW:TRIGger:OUTPut3:PATTern #HE0F52,20
// SOURce:BB:MCCW:TRIGger:OUTPut1:MODE RATio
// SOURce:BB:MCCW:TRIGger:OUTPut1:ONTime 40
// SOURce:BB:MCCW:TRIGger:OUTPut1:OFFTime 20
SOURce:BB:MCCW:TRIGger:OUTPut2:DELay 16
// ******************************************************************
// Configuring and enabling signal triggering
// ******************************************************************
SOURce:BB:MCCW:TRIGger:SEQuence SINGle
SOURce:BB:MCCW:TRIGger:SLENgth 200
// The first 200 samples of the current waveform will be output after
// the next trigger event
SOURce:BB:MCCW:TRIGger:SEQuence ARETrigger
SOURce:BB:MCCW:TRIGger:SOURce INTernal
// SOURce:BB:MCCW:TRIGger:SOURce EGT1
// An external global trigger signal must be provided at the connector
// configured for the External Global Trigger 1 signal
// SOURce:BB:MCCW:TRIGger:EXTernal:SYNChronize:OUTPut ON
// SOURce:BB:MCCW:TRIGger:EXTernal:DELay 200
// SOURce:BB:MCCW:TRIGger:EXTernal:INHibit 100
// ******************************************************************
// Applying the settings and enabling signal generation
// ******************************************************************
*TRG
SOURce:BB:MCCW:STATe ON
// Stop the internal trigger manually
SOURce:BB:MCCW:TRIGger:ARM:EXECute
// Execute manual internal trigger, i.e. restarting signal generation
SOURce:BB:MCCW:TRIGger:EXECute
SOURce:BB:MCCW:TRIGger:RMODe?
// RUN
General Settings and Carrier Setup Settings
[:SOURce<hw>]:BB:MCCW:PRESet................................................................................784
[:SOURce<hw>]:BB:MCCW:STATe.................................................................................. 784
[:SOURce<hw>]:BB:MCCW:CARRier:COUNt................................................................... 784
[:SOURce<hw>]:BB:MCCW:CARRier:SPACing.................................................................784
[:SOURce<hw>]:BB:MCCW:CLOCk?...............................................................................785
[:SOURce<hw>]:BB:MCCW:CFACtor:MODE.................................................................... 785
[:SOURce<hw>]:BB:MCCW:CFACtor............................................................................... 785
[:SOURce<hw>]:BB:MCCW:CFACtor:ACTual?..................................................................786
[:SOURce<hw>]:BB:MCCW:CARRier:STATe.....................................................................786
SOURce Subsystem

Table of Contents

Related product manuals