Getting Started
R&S
®
SMBV100B
78User Manual 1178.4460.02 ─ 03
4 Dialogs Shows a dialog as a thumbnail, the dialog name, and the
name of signal channel.
5 Diagram / More The diagram icon as shown in Figure 2-12 minimizes all
dialogs indicated on the screen. The block diagram is in
the foreground.
The "More" softkey indicates that more dialogs are open
than can be displayed in the taskbar. Use this softkey to
open a selection list with the remaining active dialogs, and
the "Diagram" function.
2.5.3.4 Additional Display Characteristics
The following section provides a short insight on the indication of the screen in general,
and significant elements that you see under specific operating modes, in dialogs or set-
tings.
●
Appearance of active elements
– Active elements like On/Off switches, state buttons have a blue background.
– Selected elements are framed or highlighted orange.
– Inactive elements are gray.
●
On-Screen keypads
As additional means of interacting with the instrument without having to connect an
external keyboard, either a numerical or alphanumerical on-screen keypad appears
when you activate an entry field (see Chapter 2.5.5, "Entering Data",
on page 80).
●
Info line
The "Info line" shows brief status information and error messages. It appears when
an event generates a message.
●
Key parameters indicated in tab labels
Most dialogs are divided into tabs with logically grouped parameters. The tab label
expresses the content and can also contain status indicators or the set value of a
key parameter.
●
Scroll bar handle
An arrow icon that appears when you touch a scroll bar helps you to scroll in a dia-
log or list.
●
Context-sensitive menus
Within the entire screen display, including single parameters, you can access con-
text-sensitive menus that provide some additional functions.
Instrument Control
To Next Page
Loading...
