Rohde & Schwarz SMBV100B - Accessing the R&S SMBV100 B File System Via SMB (Samba)

File and Data Management
R&S
®
SMBV100B
500User Manual 1178.4460.02 ─ 03
See Chapter 10.5.4, "Password Management", on page 545.
5. Enter the password to access the user directory.
The user directory corresponds to the /var/user/ directory of the instrument.
There, you can perform standard functions like creating directory, or saving files.
6. In the user directory, create a directory, e.g. test ftp.
7. Select Save/Rcl.
Open the /var/user/ directory.
The dialog displays the /var/user/test ftp directory.
9.9.3 Accessing the R&S SMBV100B File System Via SMB (Samba)
The SMB (Samba) protocol is an alternative way to access the file system of the instru-
ment from a remote PC. This protocol works if both the instrument and the PC are con-
nected to a LAN.
For information on how to set up a LAN connection, refer to:
●
Chapter 2.1.4, "Setting Up a Network (LAN) Connection", on page 37
●
Chapter 11, "Network Operation and Remote Control", on page 550
To access the file system via SMB
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via ftp
How to Transfer Files from and to the Instrument