Rohde & Schwarz SMBV100B - Display and Keyboard Settings

General Instrument Functions
R&S
®
SMBV100B
510User Manual 1178.4460.02 ─ 03
We recommend that you switch off the display update for optimum sweep performance
with short dwell times and for fast settling times.
Consider that in this case the displayed values can differ from the operated values.
In detail described in the following paragraphs, you can:
●
Set display and keyboard language, see Chapter 10.1.1, "Display and Keyboard
Settings", on page 510
●
Customize the GUI appearance, see:
– Dialog snapshots
– Chapter 10.1.2, "Appearance Settings", on page 512
●
Set date and time for the system clock, see Chapter 13.3.1, "Date and Time Set-
tings", on page 929
●
Configure and activate a Screen Saver
●
Deactivate display update to improve performance, see Chapter 10.1.3, "Display
Update Settings", on page 512
●
Determine the state of the RF signal, and the level display in the status bar when
you turn on the R&S SMBV100B, see Chapter 10.1.4, "Defining the RF Signal
State On Power On ", on page 512.
10.1.1 Display and Keyboard Settings
Access:
1. Select "System Config > Setup > User Interface > Display/Keyboard > Display".
2. Select "Display/Keyboard > USB Keyboard".
In the "Display/Keyboard" dialog, you can change regional and language options
for the GUI and an external keyboard, and define the screen saver settings.
Customizing the User Interface