Rohde & Schwarz SMBV100B - General Settings

Configuring the Internal Baseband Source
R&S
®
SMBV100B
209User Manual 1178.4460.02 ─ 03
11. Select "ARB: Multi Segment > General > Create and Load Output File" to store and
load current multi-segment file.
12. To enable the instrument to use the configured “play list”, select "ARB > Next Seg-
ment Waveform Options > Next Segment Mode > Sequencer".
All segments in a “play list” must have the same clock rate.
Settings:
● General Settings................................................................................................... 209
● Sequencing Play List Settings...............................................................................210
General Settings
Access:
► Select "Baseband > ARB > General > Multi Segment > Sequencing List...".
Settings:
New/Load Sequencing List......................................................................................... 209
Save List/Save List As................................................................................................ 209
Sequencing List...........................................................................................................209
Assigned to Multi Seg. Waveform............................................................................... 209
New/Load Sequencing List
Accesses the standard "Select Sequencing List" function to define the name of the new
play list file or select of an existing one.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect on page 756
Save List/Save List As
Saves the current entries of the table in a play list file. Play list files have the file exten-
sion *.wvs.
The default filename of the play list file is the same as the multi-segment waveform file-
name, but it can be changed.
Sequencing List
Displays the name of the selected sequencing list file, i.e. the file with the “play list” set-
tings (see Chapter 3.7.2.3, "File Concept", on page 194).
Remote command:
n.a.
Assigned to Multi Seg. Waveform
Displays the name of the multi-segment waveform file the current sequencing list file is
assigned to.
Generating Multi-Segment Waveform Files