Remote Control Commands
R&S
®
SMBV100B
646User Manual 1178.4460.02 ─ 03
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix <Prefix>
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe <State>
Uses the prefix for the automatic generation of the file name, provided PREF:STAT is
activated.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 641
Manual operation: See "Prefix, Year, Month, Day" on page 506
12.12
KBOard Subsystem
The KBOard subsystem contains the commands to set a connected keyboard.
:KBOard:LAYout.............................................................................................................646
:KBOard:LAYout <Layout>
Selects the language for an external keyboard and assigns the keys acccordingly.
Parameters:
<Layout> CHINese | DANish | DUTCh | DUTBe | ENGLish | ENGUK |
FINNish | FRENch | FREBe | FRECa | GERMan | ITALian |
JAPanese | KORean | NORWegian | PORTuguese | RUSSian |
SPANish | SWEDish | ENGUS
*RST: n.a. (factory preset: ENGLish)
Example:
:KBOard:LAYout US
// activates American keyboard
Manual operation: See "USB Keyboard > Layout" on page 511
12.13 OUTPut Subsystem
In the OUTPut subsystem, you can configure the output signals.
The LF output signal is defined with the commands of the Chapter 12.16.10,
"SOURce:LFOutput Subsystem", on page 837 system.
Common suffixes
The following common suffixes are used in remote commands:
OUTPut Subsystem
To Next Page
Loading...
