Rohde & Schwarz SMBV100B - Source:frequency Subsystem

Remote Control Commands
R&S
®
SMBV100B
820User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:LOCal
For [:SOURce<hw>]:CORRection:FRESponse:RF:OPTimization:MODEQHIG,
triggers optimization for the current settings.
Example: See Example "Enabling high-quality optimization" on page 818.
Usage: Event
Manual operation: See "Optimize for current setting" on page 283
12.16.6 SOURce:FREQuency Subsystem
The SOURce:FREQuency subsystem contains the commands used to define the fre-
quency settings for the RF sources and sweeps.
Example: Frequency configuration
SOURce1:FREQuency:MODE CW
SOURce1:FREQuency:CW 6000000000
SOURce1:FREQuency:OFFSet 2000000000
SOURce1:FREQuency:MULTiplier 1.5
SOURce1:FREQuency:CW?
// 11000000000
// SOURce1:FREQuency:STEP:MODE USER
// SOURce1:FREQuency:STEP:INCRement 1000000
// SOURce1:FREQuency:CW UP
SOURce1:PHASe 2
SOURce1:PHASe:REFerence
SOURce Subsystem