Rohde & Schwarz SMBV100B - Example: {Date: 2009-04-02;14:32:12}; CLOCK: Frequency; Tags for Single and Multi-Segment Waveforms

Configuring the Internal Baseband Source
R&S
®
SMBV100B
180User Manual 1178.4460.02 ─ 03
The tag contains the date and time at which the file was created. The year must be
expressed as four digits. The instrument does not analyze this tag.
Example:
{DATE: 2009-04-02;14:32:12}
BB:ARB:WAV:TAG? 'DATE'
Queries the content of the DATE tag of the selected waveform
file.
Response: '2009-04-02;14:32:12'
The waveform was created on April 2, 2009 at 14 hrs 32 min
Usage: Setting only
3.6.5.2
Tags for Single and Multi-Segment Waveforms
The following tags apply to waveforms and multi-segment wavefroms, additionally to
the tags listed in Chapter 3.6.5.1, "Common Tags", on page 178.
{CLOCK: frequency}.......................................................................................................180
{CONTROL LENGTH: ControlLength}.............................................................................. 181
{EMPTYTAG-Length: #EmptySequence}.......................................................................... 182
{LEVEL OFFS: RMSOffset_dB,PeakOffset_dB}................................................................ 182
{MARKER MODE [#]: GENERATOR}............................................................................... 183
{SAMPLES: Samples}.................................................................................................... 184
{BURST LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}.......................................184
{CW MODE LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}..................................184
{HOP LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}...........................................184
{LEVATT LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}...................................... 184
{MAP LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}...........................................184
{MARKER LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}.................................... 184
{[TRACE] LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}..................................... 184
{WAVEFORM-Length: #I0Q0I1Q1...IxQx...IN-1QN-1…}......................................................185
{MWV_SEGMENT_COUNT: NumOfSeg}..........................................................................186
{MWV_SEGMENT_LENGTH: SamplesSeg0, SamplesSeg1, …, SamplesSegN-1}............... 187
{MWV_SEGMENT_START:
SampleStartOffsetSeg0, SampleStartOffsetSeg1, …, SampleStartOffsetSegN-1}.......187
{MWV_SEGMENT_CLOCK_MODE: Mode}......................................................................187
{MWV_SEGMENT_CLOCK: ClockSeg0, ClockSeg1, …, ClockSegN-1}...............................188
{MWV_SEGMENT_LEVEL_OFFS:
RMSOffs_dBSg0,PeakOffs_dBSg0, …, RMSOffs_dBSgN-1, PeakOffs_dBSgN-1}......188
{MWV_SEGMENT_FILES:
“FileNameSeg0.wv”, “FileNameSeg1.wv”, …, “FileNameSegN-1.wv”}........................188
{MWV_SEGMENTx_COMMENT: text}..............................................................................188
{CONTROL LIST WIDTH4–Length: #m0m1…mx…mM-1}..................................................189
{CLOCK: frequency}
(mandatory for waveforms)
The tag specifies the clock frequency at which the waveform has to be output, in Hz
(on multi-segment waveforms this tag contains the maximal clock of all segments).
Using the Arbitrary Waveform Generator (ARB)