Network Operation and Remote Control
R&S
®
SMBV100B
572User Manual 1178.4460.02 ─ 03
Parameter Value
ICMP ping Enabled
Password for LAN configuration LxiWebIfc
The LAN reset also resets the following parameters for the vector signal generator:
Parameter
Hostname
Instrument-specific hostname
Description Vector signal generator
Negotiation Auto detect
VXI-11 discovery Enabled
11.5.2 LXI Browser Settings
To access the instrument via the web browser:
► In the address field of the browser on your PC, type the instrument's host name or
IP address, for example http://10.113.1.151.
Note: Do not add the missing zeros in the IP address, while opening the instru-
ment homepage.
The instrument homepage (welcome page) opens.
The navigation pane of the browser interface contains the following elements:
● "LXI"
– "Home" opens the instrument homepage.
The homepage displays the device information required by the LXI stan-
dard, including the VISA resource string in read-only format.
– "Device Indicator" activates or deactivates the LXI status indication.
When activated, the LXI LEDs flash, both in the browser dialog and in the
LXI dialog of the connected instrument, see LAN Status. A green LXI status
symbol indicates that a LAN connection has been established; a red sym-
bol indicates that no LAN cable is connected.
– "Lan Configuration" allows you to configure LAN parameters and to initiate
a ping, see "Ping Client" on page 575.
– "Status" displays information about the LXI status of the instrument.
– "Utilities" provides access to the LXI event log functionality required by the
LXI standard.
● "Instrument Control"
– "Web Control" provides remote access to the instrument, see "Starting a
remote control via the LXI web browser" on page 579.
● "Diagnostics"
– "SCPI Remote Trace" records messages exchanged via the remote control
interface, see "SCPI Remote Trace" on page 575.
● "Help"
– "Glossary" explains terms related to the LXI standard.
LXI Settings
To Next Page
Loading...
