Remote Control Commands
R&S
®
SMBV100B
720User Manual 1178.4460.02 ─ 03
Example: see [:SOURce<hw>]:BB:DM:FILTer:PARameter:SPHase
on page 719
Modulation and Coding Settings
[:SOURce<hw>]:BB:DM:CODing <Coding>
Selects the modulation coding.
Parameters:
<Coding> OFF | DIFF | DPHS | DGRay | GRAY | GSM | NADC | PDC |
PHS | TETRa | APCO25 | PWT | TFTS | INMarsat | VDL |
EDGE | APCO25FSK | ICO | CDMA2000 | WCDMA |
APCO258PSK
OFF
The coding is automatically disabled if the selected modulation
type is not possible with the coding that has been set
DPHS
Phase Difference
DGRay
Difference + Gray
*RST:
GSM
Example: See Example "Performing general tasks" on page 712
Manual operation: See "Coding" on page 119
[:SOURce<hw>]:BB:DM:FORMat <Format>
Sets the modulation type.
When a standard is selected ([:SOURce<hw>]:BB:DM:STANdard), the modulation
type is set to the default value.
Parameters:
<Format> ASK | BPSK | P2DBpsk | QPSK | QPSK45 | OQPSk | P4QPsk |
P4DQpsk | PSK8 | P8D8psk | P8EDge | QAM16 | QAM32 |
QAM64 | QAM256 | QAM1024 | MSK | FSK2 | FSK4 | USER |
FSKVar | QAM128 | QEDGe | QAM16EDge | QAM32EDge |
AQPSk | QAM4096 | APSK16 | APSK32 | FSK32 | FSK64 |
FSK8 | FSK16 | QAM512 | QAM2048
*RST: MSK
Example: See Example "Performing general tasks" on page 712
Manual operation: See "Modulation Type" on page 122
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe <Angle>
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
SOURce Subsystem
To Next Page
Loading...
