General Instrument Functions
R&S
®
SMBV100B
528User Manual 1178.4460.02 ─ 03
Settings
Clear User Menu
Removes all entries from the "User Menu" at once.
10.3.2 Define User Key Actions Settings
Access:
► Select "System Configuration > Setup > User Interface > Define User Key".
The dialog displays a list of the currently enabled actions and provides functions to
define new, edit or remove existing actions. If no actions have been defined, the list
is empty.
See Chapter 10.3.3, "Assigning Actions to the [★ (User)] Key", on page 529.
The remote commands required to define these settings are described in Chapter 12.9,
"DISPlay Subsystem", on page 634.
Name
Enters a user-defined name for the action.
Wizard
Defines the action to be executed.
"Load SCPI Script"
Selecting the action load and executes the SCPI script.
"Recall Setup"
Load a setup for quick access to the user-defined settings.
"Open Dialog"
Quick access to the selected dialog.
Organizing Frequently Used Settings as Favorites
To Next Page
Loading...
