Rohde & Schwarz SMBV100B - LXI Settings

Network Operation and Remote Control
R&S
®
SMBV100B
570User Manual 1178.4460.02 ─ 03
The "QR Code" dialog shows the current instrument address (IP address) in quick
response (QR) format.
This functionality provides fast access to the instrument via VNC with, for example, a
smartphone or a tablet.
See Chapter 11.16.2, "Setting Up a Remote Operation from a Smart Device",
on page 602.
11.5 LXI Settings
On the R&S SMBV100B the LXI functionality is already installed and enabled, see LXI
Status Settings. Thus, the instrument can be accessed via any web browser (like the
Microsoft Internet Explorer) to perform the following tasks:
●
Modifying network configurations
●
Remote control the instrument
●
Performing SCPI remote diagnostics
The LAN settings are configured using the instrument's LXI browser interface descri-
bed in Chapter 11.5.2.1, "LAN Configuration", on page 573.
LXI Settings