Rohde & Schwarz SMBV100B - Shutting down and Rebooting the Instrument

General Instrument Functions
R&S
®
SMBV100B
549User Manual 1178.4460.02 ─ 03
10.7 Shutting Down and Rebooting the Instrument
The On/Standby front panel key switches the instrument from the standby to the ready
state or vice versa. In remote operation from a remote computer or in manual control,
there is another possibility to shut down the instrument or to reboot the system.
Access:
► Select "System Config > Setup > Maintenance > Shut down".
Remote control commands:
●
:SYSTem:REBoot on page 912
●
:SYSTem:SHUTdown on page 913
Shutting Down and Rebooting the Instrument