Rohde & Schwarz SMBV100B - Overview

Multi-Instrument Setups
R&S
®
SMBV100B
455User Manual 1178.4460.02 ─ 03
8.5.3 Overview
Access:
► To display an interactive overview diagram of the current configuration, select "Sys-
tem Configuration > Overview".
The overview tab shows information on the following:
● Current stream mapping to the output interfaces
See Chapter 8.5.1, "I/Q Stream Mapper Settings", on page 443.
● Connected controller (external PC).
See Chapter 8.5.2, "External RF and I/Q Settings", on page 443.
● Connections for remote control of connected external I/Q and RF devices
● Input and output signals, like:
– LO coupling or used external reference frequency.
– Connected external baseband source to the digital input interface.
Hotspots for fast access to the required settings
Several of the displayed elements are hotspots. Select an element to access the rela-
ted dialog.
8.6 Digital Baseband Input Settings
The R&S SMBV100B provides interfaces to feed an external digital baseband signal
into the signal path.
Digital Baseband Input Settings