Getting Started
R&S
®
SMBV100B
44User Manual 1178.4460.02 ─ 03
Function Keys
Function keys provide access to most common generator settings and functions.
A detailed description of the corresponding functions is provided in the user manual.
Table 2-2: Function keys
Function key Assigned functions
[Freq] Activates frequency entry.
[Level] Activates level entry.
[Home] Brings the block diagram to the foreground. Active dialogs are minimized.
[RF on/off] Switches the RF output on and off. Press the key again to restore the last
active status.
Status is displayed in the "Status bar".
[Mod on/off] Switches the modulations on and off. Press the key again to restore the
last active status.
Status is displayed in the "Status bar".
[★ (User)] Key with a customizable function.
Keypad
The keypad is used to enter alphanumeric parameters, including the corresponding
units. It contains the following keys:
Table 2-3: Keys on the keypad
Type of key Description
Alphanumeric keys Enter numbers and (special) characters in edit dialog boxes.
Decimal point Inserts a decimal point "." at the cursor position.
Sign key Changes the sign of a numeric parameter. In the case of an alphanu-
meric parameter, inserts a "-" at the cursor position.
Unit keys
(G/n dBμV, M/μ μV, k/m mV and
x1 dB(m))
These keys add the selected unit to the entered numeric value and com-
plete the entry.
In the case of level entries (e.g. in dB) or dimensionless values, all units
have the value "1" as multiplying factor. Thus, they have the same func-
tion as an [Enter] key.
Editing Keys
Editing keys enable you to confirm an entry, delete individual characters, or exit the
current operation.
Instrument Tour
To Next Page
Loading...
