Multi-Instrument Setups
R&S
®
SMBV100B
442User Manual 1178.4460.02 ─ 03
8.4.1.5 Further Information
For description of the settings related to connection establishment, see:
●
Chapter 8.5.2, "External RF and I/Q Settings", on page 443
●
Chapter 8.5.1, "I/Q Stream Mapper Settings", on page 443
For information on the manual and remote control operation of the external instru-
ments, see the documentation of the particular instrument:
●
For R&S SGT, see the SGT100A User Manual
8.5 System Configuration Settings
The settings in this dialog comprise the I/Q mapping and the processing of the gener-
ated I/Q streams. Form this dialog, you can control and configure the connections to
instruments connected to the RF and I/Q connectors.
Required options
The equipment layout includes:
●
Base unit
●
Option differential analog I/Q outputs R&S SMBVB-K17
●
Optional, option frequency R&S SMBVB-B10/-KB106
Settings:
For description of the "Multi-Instrument" settings, see Chapter 8.3.1.1, "Multi-Instru-
ment Settings", on page 429.
This section described the following settings:
● I/Q Stream Mapper Settings..................................................................................443
● External RF and I/Q Settings................................................................................ 443
● Overview............................................................................................................... 455
System Configuration Settings
To Next Page
Loading...
