Rohde & Schwarz SMBV100B - Automatic Naming

Remote Control Commands
R&S
®
SMBV100B
643User Manual 1178.4460.02 ─ 03
:HCOPy:REGion <Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST: ALL
Example: See Example "Store a hard copy of the display" on page 641
Manual operation: See "Region" on page 505
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 12.11.2, "Automatic Naming", on page 643.
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 641
Manual operation: See "File..." on page 504
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example:
See Example "Store a hard copy of the display" on page 641
Usage: Event
Manual operation: See "Save" on page 505
12.11.2 Automatic Naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?.........................................................................................644
:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 644
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 644
:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 644
:HCOPy:FILE[:NAME]:AUTO:STATe.................................................................................645
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe................................................................645
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe...........................................................645
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................. 645
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................645
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 646
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe........................................................... 646
HCOPy Subsystem