Configuring the RF Signal
R&S
®
SMBV100B
339User Manual 1178.4460.02 ─ 03
You can create data lists with the internal editor or import externally created files, see
"Creating and handling lists" on page 324.
Remote command:
[:SOURce<hw>]:LIST:CATalog? on page 859
[:SOURce<hw>]:LIST:SELect on page 860
[:SOURce<hw>]:LIST:DELete on page 859
[:SOURce<hw>]:LIST:DELete:ALL on page 859
Edit List Mode Data
Opens the editor to insert and save data lists with RF frequency, power and dwell time
values, see Chapter 6.10.7, "List Editor", on page 341.
You find this function also in standard file select dialog, accessed via List Mode Data .
List Range from/to
Defines an index range in the current list by setting the start and stop index.
The instrument generates the signal with the values of the selected index range and
ignores all other list entries.
Remote command:
[:SOURce<hw>]:LIST:INDex:STARt on page 856
[:SOURce<hw>]:LIST:INDex:STOP on page 856
6.10.6.3 Import/Export Settings
Access:
1. Select "RF" > "Sweep/List" > "List Mode".
2. Select "List Mode Data" > "Im-/Export".
The "Im-/Export" dialog provides the parameters for importing or exporting files with
user data in standard ASCII *.txt or *.csv file format.
The table separators and the decimal floating point numbers are customizable.
Varying the RF Signal in List or Sweep Mode
To Next Page
Loading...
