Configuring the RF Signal
R&S
®
SMBV100B
292User Manual 1178.4460.02 ─ 03
6.6 RF Level Settings
Access:
1. Select "RF" > "RF Level" > "Level".
In the "RF Level" dialog, you can configure the offset-free level, the level limit, and
the step width for varying the level with the rotary knob.
2. Select "User Variation" to set the step width to be used when setting the RF level
using the rotary knob.
The remote commands required to define the settings are described in Chap-
ter 12.16.15, "SOURce:POWer Subsystem", on page 867.
RF Level Settings
To Next Page
Loading...
