EasyManua.ls Logo

Rohde & Schwarz SMBV100B - Tags for Data Lists

Rohde & Schwarz SMBV100B
1030 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring the Internal Baseband Source
R&S
®
SMBV100B
190User Manual 1178.4460.02 ─ 03
3.6.5.3 Tags for Data Lists
The following tags apply to data lists, additionally to the tags listed in Chapter 3.6.5.1,
"Common Tags", on page 178.
{DATA BITLENGTH: BitLength}....................................................................................... 190
{DATA LIST-Length: #d0d1...dx...dN-1…}......................................................................... 190
{DATA BITLENGTH: BitLength}
(mandatory for data lists)
The tag defines the length of the data field in the DATA LIST tag in bits in ASCII for-
mat.
Example:
{DATA BITLENGTH: 444}
BB:DM:DLIS:SEL "/var/user/dl"
BB:DM:DLIS:TAG? "dl","DATA BITLENGTH"
Queries the content of the DATA BITLENGTH tag of the
selected data list file.
Response: '444'
The data list is 444 bits long.
Usage: Setting only
{DATA LIST-Length: #d0d1...dx...dN-1…}
(mandatory for data lists)
The tag contains the actual bit sequence of the data list in binary format.
Setting parameters:
Length Defines the number of bytes in the DATA LIST tag in ASCII
Format (see {WAVEFORM-Length:
#I0Q0I1Q1...IxQx...IN-1QN-1…} for details).
dx Data bits in binary format (8-bit unsigned characters, MSB first).
Example:
{DATA LIST-17: #d0d1...dx...d127}
16 bytes containing 128 data bits, first bit is the MS bit of the first
byte.
Usage: Setting only
3.6.5.4 Tags for Control Lists
The following tags apply to control lists, additionally to the tags listed in Chap-
ter 3.6.5.1, "Common Tags", on page 178.
{CONTROL LENGTH: ControlLength}.............................................................................. 191
{BURST LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}.......................................191
{CW MODE LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}..................................191
{HOP LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}...........................................191
{LEVATT LIST [#]: Pos0:State0; Pos1:State1; ...PosN-1:StateN-1}...................................... 191
Using the Arbitrary Waveform Generator (ARB)

Table of Contents

Related product manuals