Rohde & Schwarz SMBV100B - Page 274

Adding Noise and Predistortions, and Impairing the Signal
R&S
®
SMBV100B
272User Manual 1178.4460.02 ─ 03
The dialog covers the settings for I/Q impairment, like carrier leakage, imbalance
and quadrature offset.
2. To access the dialog with settings for the corresponding digital I/Q impairments,
select one of the following:
● Select "I/Q Mod > Digital Impairments"
● Select "I/Q Analog > Digital Impairments"
● Select "I/Q Digital > Digital Impairments"
The dialog covers the settings for I/Q impairment, like carrier leakage, imbalance,
offset and delay.
The parameters "Skew" and "IQ Delay" are enabled in the "I/Q Modulator or I/Q
Analog > Digital Impairments" dialog.
The remote commands required to define these settings are described in:
●
Chapter 12.16.4.6, "SOURce:BB:IMPairment Subsystem", on page 802.
●
Chapter 12.16.8, "SOURce:IQ Subsystem", on page 830.
Impairing the Signal