Monitoring Signal Characteristics
R&S
®
SMBV100B
424User Manual 1178.4460.02 ─ 03
2. Select "Roll Off Factor", open the context menu, and select "Preset this parame-
ter".
To zoom into a diagram
In an enlarged diagram:
1. Use the one-finger zoom to zoom with a fixed zoom factor.
2. Use the two-finger zoom to do a custom zoom.
This zoom works like the two-finger pinching for magnifying images on your cell
phone.
If the diagram is zoomed, an overview window appears.
3. Move the visible area in the graphics or in the overview window.
4. For the reverse operation, select "Zoom out".
To enable markers to readout exact measured data
In an enlarged diagram:
1. Select "Show Marker".
Two markers appear, one over the other.
2. To position the markers, select and shift them.
"M2-M1" indicates the distance of marker 1 and marker 2 on the x-axis (left value)
and on the y-axis (right value).
Displaying Baseband Signal Characteristics in Real-Time
To Next Page
Loading...
