Network Operation and Remote Control
R&S
®
SMBV100B
601User Manual 1178.4460.02 ─ 03
3. Select "VNC Server" and enter the IP address of the instrument.
4. To initialize the connection, select "Connect".
A dialog opens requesting the password.
5. Enter the password and confirm with "OK".
The default password is instrument.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated from the remote computer.
Terminating VNC connection
► Perform one of the following:
a) On an external Unix/Linux PC, close the Internet browser or the signal genera-
tor window.
b) On an external Windows PC, close the VNC viewer program.
The connection is terminated but not disabled. It can be established again any
time.
In the "Active Connections" tab, the displayed TCP/IP connection disappears.
Consider, however, the note concerning unauthorized access due to VNC connec-
tion ("Risk of unauthorized access" on page 551).
How to Set Up Remote Operation via VNC
To Next Page
Loading...
