Rohde & Schwarz SMBV100B - Page 610

Network Operation and Remote Control
R&S
®
SMBV100B
608User Manual 1178.4460.02 ─ 03
Table 11-3: Remote control status icons
GUI symbol Transition to remote control state... Transition to manual operation...(local state)
&GTR (controller)
Remote control, but usable front panel keys.
The parameters are in read-only mode.
●
&GTL (controller)
●
Tap the "Remote" icon (display)
●
[Local] (front panel or key emulation)
A currently performed setting is indicated by the green
arrows.
The setting must be completed (white arrows), other-
wise the instrument remains in remote state.
&LLO (controller)
Remote control with locked front panel keys to
prevent user interaction.
The parameters are in read-only mode.
You can unlock LLO, and thus return to manual
operation only via remote control.
●
&LOCS (controller)
●
CALL IBLOC (generator%) (controller)
Note: The command &REMS returns to "Remote" state.
References