Scanlab RTC6 PCIe Board - Page 989

RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
989
innovators for industry
Changes to Document Revision 1.0.4 en-US from Document Revision 1.0.3 en-US
Where What
Global Document Revision
• 1.0.4 en-US
applies to RTC6 Software Package
• V1.7.0
(a)
Section ”Folder RTC6 Tools”, page 34 Software change.
(a)
New file.  BIOS-ETH 26 is a prerequisite
for using the Standalone Functionality.
eth_boot_dcmd, page 355 Software change.
(a)
New command.
set_eth_boot_control, page 636 Software change.
(a)
New command.
eth_boot_timeout, page 355 Software change.
(a)
New command.
set_free_variable, page 658 Software change.
(a)
Changed command.
read_image_eth, page 581 Software change.
(a)
New command.
store_program, page 800 Software change.
(a)
New command.
write_image_eth, page 859 Software change.
(a)
New command.
Chapter 16.2.15 ”Real-Time Clock”, page 897 Editorial enhancement. Description of the RTC6 Ethernet
Board real-time clock.
Chapter 16.7 ”Standalone Functionality”,
page 908
Software change.
(a)
New functionality for RTC6 Ethernet
Boards: Standalone Functionality.
Chapter 18 ”Appendix C: The RTC6 EtherBox”,
page 932
Editorial enhancement. Description of the RTC6 EtherBox.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .