Scanlab RTC6 PCIe Board - Page 996

RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
996
innovators for industry
Changes to Document Revision 1.0.15 en-US from Document Revision 1.0.14 en-US
Where What
Global Document Revision
• 1.0.15 en-US
applies to RTC6 Software Package
• V1.9.0
(a)
Chapter 2.10 ”Notes for RTC4 Users”, page 48 Editorial enhancement. Encoder counter direction of
RTC4 boards, see Notice!, page 57.
control_command, page 346 Editorial change. Content moved to Chapter 20 ”Appendix E:
iDRIVE Scan Systems – Control Commands and Signals
Transmitted to RTC Boards”, page 941.
list_repeat, page 488 Editorial enhancement. New comment, page 488.
Chapter 16.3.1 ”Hardware Installation”,
page 898
Editorial enhancement. Figure 88: voltage supply of multiple
RTC6 Ethernet Boards/RTC6 EtherBoxes.
Chapter 18.5 ”Technical Specifications
– RTC6 EtherBox”, page 938
Editorial enhancement.
Chapter 20 ”Appendix E: iDRIVE Scan Systems
– Control Commands and Signals Transmitted
to RTC Boards”, page 941
Editorial enhancement.
Appendix F: Change Index, page 984
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf .