Siemens SINAMICS G120 - Page 915

SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
915
Index
6060
Torque setpoint, 668
6220
Vdc_max controller and Vdc_min controller
(PM230/PM240), 669
6300
U/f control, overview, 670
6301
U/f characteristic and voltage boost, 671
6310
Resonance damping and slipcompensation, 672
6320
Vdc_max controller and Vdc_min controller (U/f)
(PM230/PM240), 673
6490
Speed control configuration, 674
6491
Flux controller configuration, 675
6630
Upper/lower torque limit, 676
6640
Current/power/torque limits, 677
6700
Current control, overview, 678
6710
Current setpoint filter, 679
6714
Iq and Id controllers, 680
6721
Id setpoint (PMSM, p0300 = 2), 681
6722
Field weakening characteristic, flux setpoint (ASM,
p0300 = 1), 682
6723
Field weakening controller, flux controller, Id setpoint
(ASM, p0300 = 1), 683
6724
Field weakening controller (PMSM, p0300 = 2), 684
6730
Interface to the Power Module (ASM, p0300 = 1),
685
6731
Interface to the Power Module
(PMSM, p0300 = 2xx), 686
6799
Display signals, 687
6820
Speed control and generation of the torque limits,
overview (p0096 = 2), 695
6821
Current control, overview (p0096 = 2), 696
6822
Speed setpoint, precontrol symmetrization,
acceleration model (p0096 = 2), 697
6823
Moment of inertia estimator (p0096 = 2), 698
6824
Speed controller with Kp_n/Tn_n adaptation)
(p0096 = 2), 699
6826
Torque setpoint (p0096 = 2), 700
6827
Vdc_max controller and Vdc_min controller
(p0096 = 2), 701
6828
Current/power/torque limits (p0096 = 2), 702
6832
Current setpoint (p0096 = 2), 703
6833
Iq and Id controller (p0096 = 2), 704
6836
Id setpoint (PMSM, p0300 = 2xx, p0096 = 2), 705
6837
Field weakening characteristic, flux setpoint (ASM,
p0300 = 1, p0096 = 2), 706
6838
Field weakening controller, flux controller, Id setpoint
(ASM, p0300 = 1, p0096 = 2), 707
6839
Field weakening controller (PMSM, p0300 = 2xx,
p0096 = 2), 708
6841
Interface to the power module (ASM, p0300 = 1,
p0096 = 2), 709
6842
Interface to the power module (PMSM, p0300 = 2xx,
p0096 = 2)), 710
6850
U/f control, overview (p0096 = 1), 689
6851
U/f characteristic and voltage boost (p0096 = 1), 690
6853
Resonance damping and slip compensation (U/f)
(p0096 = 1), 691
6854
Vdc_max controller and Vdc_min controller (U/f)
(p0096 = 1), 692
6856
Interface to the power module (ASM, p0300 = 1,
p0096 = 1), 693
7010
Friction characteristic, 712
7017
DC braking (ASM, p0300 = 1), 713
7200
Sampling times of the runtime groups, 715
7210
AND 0 ... 3, 716