Low-power timer (LPTIM) RM0440
1486/2126 RM0440 Rev 4
32.7.9 LPTIM option register (LPTIM_OR)
Address offset: 0x020
Reset value: 0x0000 0000
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. Res.
1514131211109876543210
Res. Res. Res. Res. Res. Res. Res. Res. Res. Res. IN2[2:1] IN1[2:1] IN2[0] IN1[0]
rw rw rw rw rw rw
Bits 31:6 Reserved, must be kept at reset value.
Bits 5:4 IN2[2:1]: LPTimer input 2 remap extension
Set and cleared by software.
00: connected to COMP2
01: connected to COMP4
10: connected to COMP6
11: connected to COMP6
Bits 3:2 IN1[2:1]: LPTimer input 1 remap extension
Set and cleared by software.
00: connected to COMP1
01: connected to COMP3
10: connected to COMP5
11: connected to COMP7
Bit 1 IN2[0]: LPTimer input 2 remap
Set and cleared by software.
1: connected to COMP output according to IN2[2:1] value
0: connected to GPIO
Bit 0 IN1[0]: LPTimer input 1 remap
Set and cleared by software.
1: connected to COMP output according to IN1[2:1] value
0: connected to GPIO
To Next Page
Loading...
Need help?
General
