RM0440 Rev 4 985/2126
RM0440 High-resolution timer (HRTIM)
1083
Bits 31:16 Reserved, must be kept at reset value.
Bits 15:0 CMP1x[15:0]: Timer x compare 1 value
This register holds the compare 1 value.
This register holds either the content of the preload register or the content of the active register if
preload is disabled.
The compare value must be either null or above or equal to 3 periods of the f
HRTIM
clock, that is 0x60
if CKPSC[2:0] = 0, 0x30 if CKPSC[2:0] = 1, 0x18 if CKPSC[2:0] = 2,...
The null value is programmed following the use case described in Section : Null duty cycle exception
case.
To Next Page
Loading...
Need help?
General
