Chapter 33 switch Commands
Management Switch Card User’s Guide
1017
The following example sets the priority of the switch to 24576 in the spanning tree instance 10.
33.12.9 switch mstp revision Command
Syntax:
switch mstp revision <revision>
This command sets a number to identify a region’s configuration. Devices must have the same
revision level to belong to the same region.
The following example sets the revision number of the switch to 1.
33.12.10 switch mstp show Command
Syntax:
switch mstp show
ras> switch mstp priority 10 24576
ras> switch mstp revision 1
To Next Page
Loading...
