ZyXEL Communications MSC1000G - Ima Pvc Commands

Chapter 24 ima Commands
Management Switch Card User’s Guide
719
24.5 ima pvc Commands
Syntax:
ima pvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <pvid> <priority>
This command sets a PVC on an IMA line card.
The following example shows how to map specific single-tagged frames with a PVC on IMA group 1
of slot 2 using the following settings:
• Frames: tagged with VLAN ID 200 and priority 5
• The name of an ATM profile applied to this PVC: DEFVAL
• PVC: 0/34 and using the llc encapsulation method
Syntax:
ima pvc show <slot|slot-group|slot-group-vpi/vci>
This command displays IMA PVC settings by the specified IMA slot, slot and IMA group, or slot and
IMA group with a channel.
The following example shows how to display all PVC settings on the IMA line card installed on slot 9.
The output shows 3 of 4 PVCs are tagged PVCs.
24.6 ima dtpvc Commands
Syntax:
ima dtpvc set <slot-group-vpi/vci> <profile> <llc|vcmux> <svid> <spri> <cvid> <cpri>
where
ras> ima pvc set 2-1-0/34 DEFVAL llc 200 5
ras> ima pvc show 9
pvc pvid pri mux tag profile
--------------- ----- ------ ----- ----- -------------------------------
9-2-0/33 10 7 llc tag DEFVAL
9-4-0/33 10 7 llc tag DEFVAL
9-6-111/312 1233 0 vcmux untag DEFVAL
9-6-234/334 666 0 llc tag DEFVAL
svid =
The s-tag VLAN ID, 1~4094.
spri =
The priority for the s-tag VLAN, 0~7.