ZyXEL Communications MSC1000G - Profile Voip Sip Callsvc Show Command (MSC1024 GC)

Chapter 30 profile Commands
Management Switch Card User’s Guide
919
• Registration timeout: on 3600 seconds
• DND: on
• Call holding: on
• Call waiting: on
• Call return: on
• CLIP: on
• CLIR: on
• Call transferring: on
• Conference: on
• fax: G.711
• Initial Digit Time: 8 seconds
• Inter Digit Time: 3 seconds
• DTMF: bypass
• Local call: off
• Flash: invite
• MWI: on
• Numbering plan: off.
• Local help: off
The following example shows a command configuring a SIP call service profile named “csp1” with the following
settings:
• dailing plan: on
• Country code: 49
• National destination code: 40
• Numbering plan table: “plan9”
• Call holding: off
• Call waiting: off
• Call transferring: on
• CLIP: off
• CLIR: on
• DND: on
• DTMF: SIP INFO
• Fax: T-38
30.22.6 profile voip sip callsvc show Command (MSC1024GC)
Syntax:
profile voip sip callsvc show [<profile>]
This command displays the settings of the specified SIP call service profile, or displays the names of
all call service profiles if none is specified.
30.23 profile voip sip Command
Use these commands to set up and manage SIP profiles. SIP profiles map to ports on the VoIP line cards, and
contain the SIP server connection details.
ras> profile voip sip callsvc set csp1 dialplan on 49 40 plan9 callhold off
callwait off calltransfer on clip off clir on dnd on dtmf sipinfo fax t38