Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
234
9.8.4 VDSL Port Setup Advanced: Limit Mask Profiles
The following section describes the limit mask profiles supported by your Device. Select a limit
mask profile for use on your DSL line or line bundle. To minimize interference between PSDs assign
a single limit mask profile to a DSL line or line bundle.
Table 102 VDSL2 Limit Mask profiles
ANNEX A
VDSL1 (FOR BACKWARDS
COMPATIBILITY)
ANNEX B ANNEX C
vdsl12_a_nus0
vdsl12_a_eu23
vdsl12_a_eu36
vdsl12_a_eu40
vdsl12_a_eu44
vdsl12_a_eu48
vdsl12_a_eu52
vdsl12_a_eu56
vdsl12_a_eu60
vdsl12_a_eu64
vdsl12_a_eu128
vdsl1_fttex_ansi_m1
vdsl1_fttex_ansi_m2
vdsl1_fttcab_ansi_m1
vdsl1_fttcab_ansi_m2
vdsl1_fttex_ansi_m1_e
vdsl1_fttex_ansi_m1_e
vdsl1_fttcab_ansi_m1_e
vdsl1_fttcab_ansi_m2_e
vdsl12_a_ct
vdsl12_b8_1
vdsl12_b8_2
vdsl12_b8_3
vdsl12_b8_4
vdsl12_b8_5
vdsl12_b8_6
vdsl12_b8_7
vdsl12_b8_8
vdsl12_b8_9
vdsl12_b8_10
vdsl12_b8_11
vdsl12_b8_12
vdsl12_b8_13
vdsl12_b8_14
vdsl12_b8_15
vdsl12_b8_16
vdsl12_b7_1
vdsl12_b7_2
vdsl12_b7_3
vdsl12_b7_4
vdsl12_b7_5
vdsl12_b7_6
vdsl12_b7_7
vdsl12_b7_8
vdsl12_b7_9
vdsl12_b7_10
vdsl12_b7_7
vdsl12_bt_anfp (BT only)
vdsl12_c_138_b
vdsl12_c_276_b
vdsl12_c_138_co
vdsl12_c_276_co
To Next Page
Loading...
