ZyXEL Communications MSC1000G - Profile Voip Dsp Commands

Chapter 30 profile Commands
Management Switch Card User’s Guide
900
30.19 profile voip dsp Commands
Use these commands to set up and manage Digital Signal Processing for the VoIP line cards. Each
DSP profile specifies VoIP-related attributes, such as the voice codecs to use in a given session.
30.19.1 profile voip dsp delete Command
Syntax:
profile voip dsp delete <name>
This command removes the specified DSP profile. An example is shown to delete a DSP profile
named “digsig1”.
30.19.2 profile voip dsp map Command
Syntax:
profile voip dsp map <name>
This command displays which subscribers use the specified DSP profile. An example is shown,
displaying the subscribers that use a DSP profile named “digsig3”.
ras> profile voip dsp delete digsig1
ras> profile voip dsp map digsig3
slot port
---- ------------------------------------------------
1 2 3 4
123456789012345678901234567890123456789012345678
3
4 V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-V-----------
5
6
7
8 ------------------------
9
10