ZyXEL Communications MSC1000G - Profile Alarmvdsl Delete Command

Chapter 30 profile Commands
Management Switch Card User’s Guide
877
The following example sets an alarm profile named SESalarm that has the system send an alarm
trap and generate a syslog whenever the connection (from the IES to the subscriber) has more
than 3 severely errored seconds within a 15-minute period.
30.9.3 profile alarmvdsl delete Command
Syntax:
profile alarmvdsl delete <profile>
where
This command allows you to delete an individual VDSL alarm profile by its name. You cannot delete
the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
30.9.4 profile alarmvdsl map Command
Syntax:
profile alarmvdsl map <profile>
where
This command displays which VDSL ports are set to use the specified alarm profile.
The following example displays which VDSL ports use the SESalarm alarm profile.
ras> profile alarmvdsl set SESalarm sesl 3
<profile>
=
The name of an alarm profile.
ras> profile alarmvdsl delete SESalarm
<profile>
=
The name of an alarm profile.
ras> profile alarmvdsl map SESalarm
side port
-- ---- -------------------------------------------------------------------
1 2 3 4 5 6 7
12345678901234567890123456789012345678901234567890123456789012345678
2 - ------------------------
3 - ------------------------
4 - ------------------------------------------------
5 - ------------------------------------------------