Chapter 34 sys Commands
Management Switch Card User’s Guide
1045
The following example sets the system’s chassis number to 3.
34.3.17 sys info contact Command
Syntax:
sys info contact <contact>
where
This command sets the system contact person information.
The following example sets Bob_ext1234 as the system’s contact person information.
34.3.18 sys info frame Command
Syntax:
sys info frame <frame>
where
This command sets the system’s frame number.
The following example sets 12345 as the system’s frame number.
34.3.19 sys info hostname Command
Syntax:
sys info hostname <hostname>
where
This command sets the system name.
ras> sys info chassis 3
<contact>
=
The name (up to 31 characters) and contact information of the person in charge of
this device.
ras> sys info contact Bob_ext1234
<frame>
=
Number (an integer from 1 to 65535) of the frame (rack) where the
system is installed.
ras> sys info frame 12345
<hostname>
=
A descriptive name for identification purposes. This name can be up to 30
alphanumeric characters long.
To Next Page
Loading...
