ZyXEL Communications MSC1000G - Profile Voip Sip Callsvc Set Command (MSC1024 GC)

Chapter 30 profile Commands
Management Switch Card User’s Guide
917
30.22.5 profile voip sip callsvc set Command (MSC1024GC)
Syntax:
profile voip sip callsvc set <profile>
[keypattern <pattern-table>]
[registration off|{on [<re>]}]
[dialplan off|on {<cc> <ndc> <dialplan-table>}]
[localhelp off|on {<tel-number> <localhelp-table>
[<tel-number> <localhelp-table>...]}]
[dnd on|off]
[dtmf bypass|rfc2833|sipinfo|rfc2833like|plaintext]
[callhold on|off]
[callwait on|off]
[callreturn on|off]
[clip on|off]
[clir on|off]
[calltransfer on|off]
[conference on|off]
[fax t38|g711]
[firstdigit <fdt>]
[interdigit <idt>]
[flash invite|rfc2833|rfc2833like|sipinfo1|sipinfo2|sipinfo3|sipinfo4|{sipinfo5
[<rc>]}|{sipinfo6 [<si>]}
[localcall on|off]
[mwi on|off]
[centrex on|off]
where
keypattern =
Has the call service profile use a VoIP key pattern.
<pattern-
table>
=
Specify the VoIP key pattern to use.
registration =
Choose on and enter a time period (<re>) to have the system use the registration
timeout feature. If the system does not receive a registration confirmation message
from the SIP server in the time specified, it drops the connection.
Select off to not use the registration timeout feature.
re =
This is the registration expiration time in seconds, 120~65535.
dialplan
=
When this is off, the call service profile does not reference a configured dailing plan.
When this is on, the call service profile references the specified dialing plan.
<cc> =
The country code. This defines the digits the numbering plan inserts when a rule
contains “\c”.
<ndc> =
The national destination code. This defines the digits the numbering plan inserts when a
rule contains “\d”.
<dialplan-
table>
=
The dailing plan this call service set is to use.
localhelp
=
When this is off, the call service profile does not have users access a local help table
when they call a specific telephone number.
To have this call service profile use a local help table, choose on and specify a
telephone number (tel-number) and the name of the local help table (localhelp-
table) users are to access when they call the telephone number.
<tel-number> =
The local help telephone number, up to 15 characters.