ZyXEL Communications MSC1000G - Port Disable Command

Chapter 29 port Commands
Management Switch Card User’s Guide
784
This command copies the port settings from a source port to destination ports on the same type of
line card.
The following example copies the settings from port 5 on the line card in slot 7 to all of the ports on
the line card in slot 7.
29.6 port disable Command
Syntax:
port disable <slot-port> [data|pots]
This command turns off the specified subscriber port(s).
29.7 DTPVC Commands
This section covers how to configure Double-Tag Permanent Virtual Circuits (DTPVCs) for ADSL or
SHDSL subscriber ports. See Section 9.29 on page 302 for more on DTPVCs.
29.7.1 dtpvc delete command
Syntax:
port dtpvc delete <slot-port-vpi/vci>
This command removes the specified DTPVC. The following example removes DTPVC 8/35 from
port 1 on the line card in slot 5.
29.7.2 dtpvc mvlan disable command
Syntax:
port dtpvc mvlan disable <slot-port-vpi/vci>
This command turns off MVLAN for the specified DTPVC. The following example turns off MVLAN on
DTPVC 8/35 on port 1 on the line card in slot 3.
<destination>
=
The slot and port number(s) to which you want to copy settings.
ras> port copy 7-5 7-*
ras> port dtpvc delete 5-1-8/35
ras> port dtpvc mvlan disable 5-1-8/35